CityHomesUSA.Com, 6 Useful Tips for Installing New Windows and Doors in Your Home – New windows and doors are chosen to accommodate your need of completing the style in your house. Sometimes, homeowners just want something new to create new atmosphere as well. The other homeowners would install the new ones because the old ones could not meet their need in overall. Regardless the reason you buy and install the new doors and windows, there are things you should pay attention to when it comes to installing the new ones.
Tips to install new windows and doors
1. Make sure the requirements meet the expected performance
There are plenty products if you look for new windows and doors in the market. This is why you need to make sure that the product you have chosen has met the required terms and conditions or simply matched with what you need. In order to reduce the possibility of damaged product, you can compare the capability of water performance from each product.
This thing is important especially if you will install the door for exterior use. Wind, sun, and rain are three main things that will hit the product both directly and indirectly. So, you need to check the rating of performance on each product before you buy and install the windows and doors.
2. Rebalance the HVAC system
This step is also important because it has correlation to the air infiltration. When you are going to install a window with energy-efficient feature in the existing structure, you need to rebalance the HVAC system so it will accommodate the air infiltration properly. If this step is skipped then you will find the negative pressure around the building. As the result, it creates howling and whistling noises because there might be some cracks in the envelope of the building.
3. Pay attention when installing exterior glass door
There are several points you need to understand before you install a glass door for exterior use. The cautions are such as:
- The minimum clearance width of the door should be at least 32 inches from the door’s face to the door’s stop while it is opened in 90 degrees for the access of wheelchair.
- The sliding door track and threshold of the exterior door should not be more than ½ or ¼ inch on height. The locations will be beveled with slope but could not be more than 1:2 on threshold and changes in level.
- 36 inches is the minimum width of clearance for the accessible route you will find in a unit.
- Doorways of patio and balcony that lead to more than one separated room must be accessible for wheelchair.
However, it is better if you consult to the building code official in your area to make sure the code requirements that are applicable for installing new windows and doors.
Also read our another home decor ideas
4. Keep windows flush
It is important to keep the windows flush with face right on the barrier application’s surface. The wall barrier’s surface system that does not include the barrier to resist water behind the exterior surface, like the wall made of poured concrete or CMU without the cavities on the wall will not allow the window to extend through the exterior face.
5. Doing everything consistently
Installing new windows and doors in your house especially for exterior purpose is not a simple yet trivia task. You need to read the instruction from the manufacturer and if you find something difficult then you can ask the customer service or local workers who know how to install exterior door and window. Once you have asked one party, it is better to keep consulting with that party. Other than that, the manufacturer is the party with higher familiarity towards the product.
6. Safety Glazing
When you install the exterior new windows and doors, you also need to know then you need the safety glazing especially if you include glass material to those fixtures. So, you need to read the IBC 2003 rules about safety glass. And safety glazing is required if:
- The exposed edge is as near as 24 inches at the arch when the door is closed.
- The bottom part of exposed edge is not more than 60 inches at the above of walking surface.
But the safety glass is not necessary if there is a permanent barrier or intervening wall between the glazing and the door. Other than that, the glazing is not needed if the walls are perpendicular toward the wall’s plan.
Common mistakes to avoid during installation
There are about 40 common mistakes that will most likely to be done during the installation. The crucial ones that should be avoided will be summarized below.
- Weep holes are not intended to be blocked with sealant or other materials so the water could drain properly.
- Drilling through door or window frame to install alarm system will allow the water penetrates into the places and it could not get out once it gets in.
- Applying film to the glass is not recommended especially without proper consultation with the manufacturer of new windows and doors. The film could build heat and break the glass.
- When you use concrete pavers, stone, or brick in conjunction with patios, make sure you do not block the drainage floor right at the door. If you want to clear obstruction then you can use starter sill.
- Breather holes should not be blocked with the sealant. Breather holes are supposed to the air circulation way.
- Welding after installation could damage the glass if you do not shield the frame and glass.
- Each joint of metal should be sealed properly.
- Use the right sealant that is compatible with the products.
- Finished window and door opening is not a good access for material’s delivery. The debris could buildup on the frame and it could lead to damage.
- The framing surface should be protected from any corrosive material.
You should pay attention to many things before installing a window or door especially for exterior purpose in your house. And this is like the end of things you should pay attention before installing new windows and doors.